OpenLayers跨域请求WFS服务在Tomcat环境下的实现
由于项目的地图数据放在不同的服务器上面，因此进行POI搜索和路径导航的时候需要进行跨域检索，容器环境用的是Tomcat 7.0.53.配置跨域请求的步骤为：
1. 下载Proxy.cgi,或者到Openlayers的安装目录中，安装盘符\OpenLayers-2.13.1\examples中查找,或者直接拷贝本文下面的代码到proxy.cgi文件中。并修改allowedHosts，添加需要访问的远程服务器地址：端口和本地IP地址：端口。最后把proxy.cgi文件放在CGI文件夹中，拷贝到网站WEB-INF目录下，如图所示
下面是proxy.cgi源码，其中192.168.1.18:8090′,’192.168.1.50:8080′,’192.168.1.49:8080′,’192.168.1.18:8080′,’localhost:8090’是本文添加的远程服务器地址和本地地址。
#!/usr/bin/envpython
"""Thisis a blind proxy that we use to get around browser
restrictionsthat prevent the Javascript from loading pages not on the
sameserver as the Javascript. This hasseveral problems: it's less
efficient,it might break some sites, and it's a security risk because
peoplecan use this proxy to browse the web and possibly do bad stuff
withit. It only loads pages via http andhttps, but it can load any
contenttype. It supports GET and POST requests."""
importurllib2
importcgi
importsys, os
#Designed to prevent Open Proxy type stuff.
allowedHosts= ['www.openlayers.org', 'openlayers.org',
'labs.metacarta.com','world.freemap.in',
'prototype.openmnnd.org','geo.openplans.org',
'sigma.openplans.org', 'demo.opengeo.org',
'www.openstreetmap.org','sample.azavea.com',
'v2.suite.opengeo.org','v-swe.uni-muenster.de:8080',
'vmap0.tiles.osgeo.org','www.openrouteservice.org',
'maps.wien.gv.at','192.168.1.18:8090','192.168.1.50:8080','192.168.1.49:8080','192.168.1.18:8080','localhost:8090']
method= os.environ["REQUEST_METHOD"]
ifmethod == "POST":
qs = os.environ["QUERY_STRING"]
d = cgi.parse_qs(qs)
if d.has_key("url"):
url = d["url"][0]
else:
url ="http://www.openlayers.org"
else:
fs = cgi.FieldStorage()
url = fs.getvalue('url',"http://www.openlayers.org")
try:
host = url.split("/")[2]
if allowedHosts and not host inallowedHosts:
print "Status: 502 BadGateway"
print "Content-Type:text/plain"
print
print "This proxy does not allowyou to access that location (%s)." % (host,)
print
print os.environ
elif url.startswith("http://") orurl.startswith("https://"):
if method == "POST":
length =int(os.environ["CONTENT_LENGTH"])
headers ={"Content-Type": os.environ["CONTENT_TYPE"]}
body = sys.stdin.read(length)
r = urllib2.Request(url, body,headers)
y = urllib2.urlopen(r)
else:
y = urllib2.urlopen(url)
# print content type header
i = y.info()
if i.has_key("Content-Type"):
print "Content-Type: %s"% (i["Content-Type"])
else:
print "Content-Type:text/plain"
print
print y.read()
y.close()
else:
print "Content-Type:text/plain"
print
print "Illegal request."
exceptException, E:
print "Status: 500 UnexpectedError"
print "Content-Type: text/plain"
print
print "Some unexpected error occurred.Error text was:", E2. 修改tomcat配置文件web.xml，很多代码的该文件中是存在的，只不过是添加了注释，把注释去掉即可。修改如下
<servlet>
<servlet-name>cgi</servlet-name>
<servlet-class>org.apache.catalina.servlets.CGIServlet</servlet-class>
<init-param>
<param-name>debug</param-name>
<param-value>0</param-value>
</init-param>
<init-param>
<param-name>cgiPathPrefix</param-name>
<param-value>WEB-INF/cgi</param-value>
</init-param>
<init-param>
<param-name>executable</param-name>
<param-value>C:/Python27/python.exe</param-value>
</init-param>
<init-param>
<param-name>passShellEnvironment</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>5</load-on-startup>
</servlet>
<!-- ================ Built In Servlet Mappings ========================= -->
<!-- The servlet mappings for the built in servlets defined above. Note -->
<!-- that, by default, the CGI and SSI servlets are *not* mapped. You -->
<!-- must uncomment these mappings (or add them to your application's own -->
<!-- web.xml deployment descriptor) to enable these services -->
<!-- The mapping for the default servlet -->
<servlet-mapping>
<servlet-name>default</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>cgi</servlet-name>
<url-pattern>/cgi/*</url-pattern>
</servlet-mapping>
其中有一个节点要注意，该节点配置了Python的路径，如果电脑没有安装python需要安装，并且配置好路径。
<init-param>
<param-name>executable</param-name>
<param-value>C:/Python27/python.exe</param-value>
</init-param>
3. 修改tomcat配置目录中content.xml文件，在Content节点中添加privileged=”true”属性。
<?xml version='1.0' encoding='utf-8'?>
<!--
Licensed to the ApacheSoftware Foundation (ASF) under one or more
contributor licenseagreements. See the NOTICE filedistributed with
this work for additionalinformation regarding copyright ownership.
The ASF licenses thisfile to You under the Apache License, Version 2.0
(the"License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required byapplicable law or agreed to in writing, software
distributed under theLicense is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES ORCONDITIONS OF ANY KIND, either express or implied.
See the License for thespecific language governing permissions and
limitations under theLicense.
-->
<!-- The contents of this file will be loaded for each webapplication -->
<Context privileged="true">
<!-- Default set ofmonitored resources -->
<WatchedResource>WEB-INF/web.xml</WatchedResource>
<!-- Uncomment thisto disable session persistence across Tomcat restarts -->
<!--
<Managerpathname="" />
-->
<!-- Uncomment thisto enable Comet connection tacking (provides events
on sessionexpiration as well as webapp lifecycle) -->
<!--
<ValveclassName="org.apache.catalina.valves.CometConnectionManagerValve"/>
-->
</Context>4. 配置完成，开始你的跨域访问吧。
转载自：https://blog.csdn.net/longshengguoji/article/details/39609009
